Wavelength Calculator

Calculate wavelength from frequency and wave speed. Perfect for physics, acoustics, radio, and electromagnetic wave applications.

Hz
m/s
Calculated Wavelength
--
wavelength = wave speed / frequency

Quick Reference

Speed of Light
299,792,458 m/s
In a vacuum
Speed of Sound
343 m/s
In air at 20C
Visible Light
380-700 nm
Human visible range
FM Radio
88-108 MHz
2.8-3.4 meter waves

Frequently Asked Questions

What is the formula for wavelength?

The wavelength formula is wavelength = wave speed / frequency, or expressed mathematically as lambda = v / f. Where lambda is wavelength in meters, v is wave speed in meters per second, and f is frequency in Hertz (Hz). This fundamental relationship applies to all types of waves, including light, sound, and radio waves.

How do I calculate the wavelength of light?

To calculate the wavelength of light, use the formula wavelength = speed of light / frequency. The speed of light in a vacuum is approximately 299,792,458 m/s. Enter this value as wave speed and input the frequency to get the wavelength. For visible light, results are typically expressed in nanometers (nm), where 1 meter = 1,000,000,000 nanometers.

What is the wavelength of a 1 MHz radio wave?

A 1 MHz (1,000,000 Hz) radio wave traveling at the speed of light has a wavelength of approximately 300 meters. This is calculated as 299,792,458 m/s divided by 1,000,000 Hz = 299.79 meters. AM radio stations typically broadcast in the MHz range, which is why their antennas need to be quite large.

How does frequency affect wavelength?

Frequency and wavelength have an inverse relationship. As frequency increases, wavelength decreases proportionally, and vice versa. This is because wave speed remains constant in a given medium, so when one variable increases, the other must decrease. For example, doubling the frequency will halve the wavelength.

What is the speed of sound for wavelength calculations?

The speed of sound in air at 20 degrees Celsius is approximately 343 m/s. This value varies with temperature, humidity, and the medium. In water, sound travels at about 1,480 m/s, and in steel at approximately 5,960 m/s. Always use the appropriate speed for your specific medium when calculating wavelength.

What units should I use for wavelength calculations?

For consistent results, use Hertz (Hz) for frequency and meters per second (m/s) for wave speed. The calculator will return wavelength in meters. You can convert the result to other units like centimeters (multiply by 100), nanometers (multiply by 1,000,000,000), or inches (multiply by 39.37) as needed for your application.

Can I use this calculator for electromagnetic waves?

Yes, this calculator works for all types of waves including electromagnetic waves (radio, microwave, infrared, visible light, ultraviolet, X-rays, gamma rays), sound waves, water waves, and seismic waves. Just input the appropriate wave speed for your medium. For electromagnetic waves in vacuum, use 299,792,458 m/s.

What is the wavelength of visible light?

Visible light has wavelengths ranging from approximately 380 nanometers (violet) to 700 nanometers (red). This corresponds to frequencies between about 430 THz (red) and 790 THz (violet). Different wavelengths within this range create the colors we perceive, with shorter wavelengths appearing blue/violet and longer wavelengths appearing red.

What is the relationship between wavelength, frequency, and speed?
Wavelength, frequency, and wave speed are connected by the fundamental wave equation: v = f × λ. Where: v = wave speed (m/s). f = frequency (Hz = cycles per second). λ (lambda) = wavelength (m). Rearranged: λ = v / f (wavelength = speed ÷ frequency). f = v / λ (frequency = speed ÷ wavelength). What this means: for a given wave speed (like light in a vacuum, c = 299,792,458 m/s), frequency and wavelength are inversely proportional. Double the frequency → half the wavelength. Halve the frequency → double the wavelength. Examples (light in vacuum): FM radio at 100 MHz: λ = 299,792,458 / 100,000,000 = ~3.0 m. Visible light at 500 THz (green): λ = 299,792,458 / 500,000,000,000,000 = ~600 nm. X-ray at 10 EHz (10¹⁹ Hz): λ = ~30 pm (0.03 nm). Sound follows the same equation: sound in air at 20°C travels at 343 m/s. Middle C (261.6 Hz): λ = 343 / 261.6 = 1.31 m. Concert A (440 Hz): λ = 343 / 440 = 0.78 m. A (880 Hz, one octave up): λ = 343 / 880 = 0.39 m — exactly half, as expected for a doubled frequency. The speed of a wave depends on the medium, not the frequency. For light: the speed in vacuum (c) is constant; in a medium like glass, it slows down, causing refraction. For sound: speed increases in denser media (faster in water than air, faster in steel than water).
What are the wavelengths of visible light?
Visible light is the portion of the electromagnetic spectrum that the human eye can detect. The wavelength range of visible light is approximately 380 to 750 nanometers (nm). Colors and their wavelengths: violet: 380–450 nm (highest frequency/energy visible light). Indigo: 420–450 nm (often merged with violet in modern descriptions). Blue: 450–495 nm. Green: 495–570 nm. Yellow: 570–590 nm. Orange: 590–620 nm. Red: 620–750 nm (lowest frequency/energy visible light). Key facts about visible light: peak human eye sensitivity: ~555 nm (yellow-green) — this is why green is the most sensitive color in the dark-adapted eye and why many emergency signs use yellow-green. White light = all visible wavelengths combined. A prism (or raindrops) separates white light into its component wavelengths — violet bends most (shortest wavelength, highest refraction), red bends least. Why the sky is blue: Rayleigh scattering preferentially scatters shorter wavelengths (blue, ~450 nm) more than longer wavelengths (red, ~680 nm). Blue light scatters ~5.5× more than red light (scattering ∝ λ⁻⁴). Why sunsets are red/orange: at the horizon, sunlight travels through much more atmosphere. Blue light is scattered away; longer red/orange wavelengths reach the eye. Beyond visible: just below violet is ultraviolet (UV) at 10–380 nm — too short to see but detected by many insects and some birds. Just above red is near-infrared (NIR) at 750–1400 nm — used in remote controls, night vision, and fiber optic communication.
How do you calculate wavelength from frequency?
To calculate wavelength from frequency, use: λ = v / f. Where v is the wave speed and f is the frequency. For electromagnetic waves (light, radio, X-rays) in vacuum: λ = c / f, where c = 299,792,458 m/s ≈ 3 × 10⁸ m/s. Step-by-step example 1 — WiFi frequency to wavelength: WiFi frequency: 2.4 GHz = 2.4 × 10⁹ Hz. λ = (3 × 10⁸ m/s) / (2.4 × 10⁹ Hz) = 0.125 m = 12.5 cm. This explains why WiFi antennas are typically a few centimeters long (antenna length ≈ λ/4). Step-by-step example 2 — visible light: green light frequency: ~550 THz = 5.5 × 10¹⁴ Hz. λ = (3 × 10⁸ m/s) / (5.5 × 10¹⁴ Hz) = 5.45 × 10⁻⁷ m = 545 nm. For sound waves: use the speed of sound in the appropriate medium. Sound in air (20°C): v = 343 m/s. Sound in water (25°C): v ≈ 1,480 m/s. Example — concert A (440 Hz) in air: λ = 343 m/s / 440 Hz = 0.78 m. Example — same 440 Hz in water: λ = 1,480 / 440 = 3.36 m — same frequency, different medium → different wavelength. Unit conversions to keep in mind: 1 GHz = 10⁹ Hz. 1 THz = 10¹² Hz. 1 nm = 10⁻⁹ m. 1 μm = 10⁻⁶ m. When the wave is in a medium (not vacuum): light slows down. Use v = c/n, where n is the refractive index (n for glass ≈ 1.5 → light speed in glass ≈ 2 × 10⁸ m/s → wavelengths are shorter in glass).
What is the difference between wavelength and amplitude?
Wavelength and amplitude are two different properties of a wave that describe different things: wavelength (λ): the distance between two consecutive identical points on a wave — for example, from one peak to the next peak, or one trough to the next trough. Unit: meters (or nm, μm, etc. depending on scale). Determines: the type of electromagnetic radiation (color for light, tone for sound). Amplitude: the maximum displacement of the wave from its equilibrium (rest) position — the "height" of the wave. Unit: depends on the type of wave. For sound: Pascals (pressure). For light: electric field strength (V/m). For water waves: meters. Determines: the intensity or power of the wave. For light: amplitude → brightness/intensity. For sound: amplitude → loudness (measured in decibels). Key relationship: wavelength determines frequency and wave type. Amplitude determines energy and intensity. A high-amplitude wave has more energy per wave cycle — but the same wavelength and frequency. Doubling amplitude quadruples intensity (energy ∝ amplitude²). Example — two green lasers at 532 nm: same wavelength (both green, 532 nm) → same color, same frequency. Different amplitude → different brightness. The dimmer laser has lower amplitude; the brighter laser has higher amplitude. Same wavelength, same frequency, same color — different power. Another example — sound: two speakers both playing 440 Hz (concert A): same wavelength (~78 cm in air) → same pitch. Different amplitude → different loudness. These are completely independent properties in classical wave physics.

Key Takeaways

  • Wavelength equals wave speed divided by frequency: wavelength = v / f
  • Frequency and wavelength are inversely proportional - as one increases, the other decreases
  • Light travels at 299,792,458 m/s in vacuum; sound travels at 343 m/s in air
  • Visible light wavelengths range from 380 nm (violet) to 700 nm (red)
  • Radio waves can have wavelengths from millimeters to thousands of kilometers

Electromagnetic Spectrum Wavelength Reference

Region Wavelength Range Frequency Range Energy per Photon Examples
Radio waves>1 mm (up to km)<300 GHz<1.24 meVAM/FM radio, cell signals, WiFi
Microwaves1 mm – 1 m300 MHz – 300 GHz1.24 μeV – 1.24 meVMicrowave ovens, radar, WiFi
Infrared (far)25 μm – 1 mm300 GHz – 12 THz1.24–50 meVThermal imaging
Infrared (near)750 nm – 25 μm12–400 THz50 meV – 1.65 eVRemote controls, fiber optics
Visible light (violet)380–450 nm665–790 THz2.75–3.26 eVShort-wavelength visible end
Visible light (red)620–750 nm400–480 THz1.65–2.0 eVLong-wavelength visible end
Ultraviolet (UV)10–380 nm790 THz – 30 PHz3.26–124 eVSunburn, sterilization
X-rays0.01–10 nm30 PHz – 30 EHz124 eV – 124 keVMedical imaging
Gamma rays<0.01 nm (<10 pm)>30 EHz>124 keVNuclear reactions, cancer treatment

Visible Light Wavelength and Color Reference

Color Wavelength Range Frequency Range Notes
Violet380–450 nm665–790 THzShortest visible wavelength
Indigo420–450 nm665–715 THzOften merged with violet
Blue450–495 nm606–665 THzSky, ocean color appearance
Green495–570 nm526–606 THzPeak human eye sensitivity ~555 nm
Yellow570–590 nm508–526 THz—
Orange590–620 nm484–508 THz—
Red620–750 nm400–484 THzLongest visible wavelength
Near-infrared (NIR)750–1400 nm214–400 THzNot visible but used in cameras and remotes

Wave Speed in Different Media Reference

Medium Speed of Sound (approx.) Speed of Light Notes
VacuumN/A (no sound)299,792,458 m/s (c)Exact by definition
Air (20°C)343 m/s≈299,705,000 m/sLight slightly slower in air
Water (25°C)~1,480 m/s~225,000,000 m/sLight ~75% of c in water
Glass (varies)~5,000 m/s~200,000,000 m/sVaries by glass type
Diamond~12,000 m/s~124,000,000 m/sHighest refractive index of common solids
Steel~5,100 m/s~130,000,000 m/s (EM, depends)Sound much faster in solids
Note: sound requires a medium; light slows down in materials relative to c by the refractive index (n = c/v)

What Is Wavelength? Understanding Wave Properties

Wavelength is the distance between two consecutive peaks (or troughs) of a wave. It represents one complete cycle of the wave and is typically measured in meters, though smaller units like nanometers are used for light waves. Wavelength is a fundamental property that determines how waves interact with matter, making it crucial in fields ranging from telecommunications to medicine.

Every wave, whether it is light, sound, radio, or water, has a specific wavelength determined by its frequency and the speed at which it travels through a medium. Understanding wavelength is essential for designing antennas, musical instruments, optical systems, and countless other technologies we use daily.

The Wavelength Formula Explained

lambda = v / f
lambda = Wavelength (meters)
v = Wave Speed (m/s)
f = Frequency (Hz)

This elegant formula shows the inverse relationship between wavelength and frequency. When the frequency of a wave increases, its wavelength decreases proportionally, assuming the wave speed remains constant. This relationship is fundamental to understanding the entire electromagnetic spectrum, from radio waves with wavelengths measured in kilometers to gamma rays with wavelengths smaller than atoms.

How to Calculate Wavelength Step-by-Step

1

Identify the Frequency

Determine the frequency of your wave in Hertz (Hz). For example, an FM radio station at 100 MHz has a frequency of 100,000,000 Hz. Convert units if necessary (1 MHz = 1,000,000 Hz, 1 GHz = 1,000,000,000 Hz).

2

Determine the Wave Speed

Identify the speed of the wave in your medium. For electromagnetic waves in vacuum, use 299,792,458 m/s. For sound in air at room temperature, use approximately 343 m/s. For sound in water, use about 1,480 m/s.

3

Apply the Formula

Divide the wave speed by the frequency. For our FM radio example: 299,792,458 m/s / 100,000,000 Hz = 2.998 meters wavelength.

4

Convert Units if Needed

Convert the result to appropriate units. For visible light, convert meters to nanometers (1 m = 1,000,000,000 nm). For radio waves, the result in meters is typically most useful.

Common Wavelength Examples

AM Radio (1 MHz) 300 m
FM Radio (100 MHz) 3 m
Wi-Fi (2.4 GHz) 12.5 cm

All examples use the speed of light (299,792,458 m/s) for electromagnetic waves.

Understanding the Electromagnetic Spectrum

The electromagnetic spectrum encompasses all types of electromagnetic radiation, from radio waves with wavelengths measured in kilometers to gamma rays with wavelengths smaller than atomic nuclei. Each region of the spectrum has unique properties and applications.

Wave Type Wavelength Range Frequency Range Common Uses
Radio Waves 1 mm - 100 km 3 kHz - 300 GHz Broadcasting, communication
Microwaves 1 mm - 1 m 300 MHz - 300 GHz Radar, cooking, Wi-Fi
Infrared 700 nm - 1 mm 300 GHz - 430 THz Heat sensing, remote controls
Visible Light 380 - 700 nm 430 - 790 THz Vision, lighting, displays
Ultraviolet 10 - 380 nm 790 THz - 30 PHz Sterilization, tanning
X-rays 0.01 - 10 nm 30 PHz - 30 EHz Medical imaging, security

Sound Waves vs. Electromagnetic Waves

While the wavelength formula applies to all waves, sound and electromagnetic waves behave very differently. Sound waves require a medium to travel through and move much slower than light. Sound in air travels at approximately 343 m/s, while light travels at about 300,000 km/s in vacuum.

Pro Tip: Quick Mental Math for Radio Waves

For electromagnetic waves, remember this shortcut: wavelength in meters equals 300 divided by frequency in MHz. So a 100 MHz FM station has a wavelength of 300/100 = 3 meters. This approximation uses c = 300,000,000 m/s for simplicity.

Practical Applications of Wavelength Calculations

Understanding wavelength is essential in numerous fields and everyday applications:

  • Antenna Design: Radio and TV antennas are designed to be a fraction of the wavelength they receive. A half-wave dipole antenna for FM radio is about 1.5 meters long.
  • Musical Instruments: The length of organ pipes and strings determines the wavelength and pitch of sound they produce.
  • Fiber Optics: Telecommunications use specific wavelengths (typically 1310 nm and 1550 nm) that travel efficiently through glass fibers.
  • Medical Imaging: Different wavelengths penetrate tissue differently, allowing for various imaging techniques from ultrasound to X-rays.
  • Wireless Networks: Wi-Fi, Bluetooth, and cellular networks operate at specific frequencies, with wavelengths affecting signal propagation and antenna size.

Common Mistake: Forgetting Unit Conversions

Always ensure your units are consistent before calculating. If frequency is in MHz (megahertz), convert to Hz by multiplying by 1,000,000. If you need wavelength in nanometers for visible light, multiply meters by 1,000,000,000.

Wave Speed in Different Media

Wave speed varies significantly depending on the medium through which the wave travels. This affects wavelength calculations and has practical implications for many applications.

Medium Sound Speed Light Speed
Vacuum No sound (no medium) 299,792,458 m/s
Air (20C) 343 m/s ~299,710,000 m/s
Water 1,480 m/s ~225,000,000 m/s
Glass ~5,600 m/s ~200,000,000 m/s
Steel 5,960 m/s N/A (opaque)

Pro Tip: Temperature Affects Sound Speed

Sound speed in air increases by about 0.6 m/s for every 1C increase in temperature. At 0C, sound travels at 331 m/s; at 30C, it travels at about 349 m/s. This affects wavelength calculations for acoustic applications.

What significant figures should I use?
Match your significant figures to your least precise input. If you measured a length to 3 sig figs, report your answer to 3 sig figs regardless of how many decimal places the calculator shows. Excess decimal places imply false precision and are misleading in scientific reporting.