Potential Energy Calculator

Calculate gravitational potential energy using the formula PE = mgh. Enter mass and height to find stored energy in joules.

kg
m

Quick Facts

Earth's Gravity
9.8 m/s²
Standard acceleration
Moon's Gravity
1.62 m/s²
About 1/6 of Earth
Mars' Gravity
3.71 m/s²
About 38% of Earth
Energy Unit
Joule (J)
kg·m²/s²

Your Result

Calculated
Gravitational Potential Energy
0 J
PE = mass × gravity × height

Frequently Asked Questions

What is the formula for gravitational potential energy?

The formula for gravitational potential energy is PE = mgh, where PE is potential energy in joules, m is mass in kilograms, g is gravitational acceleration (9.8 m/s² on Earth), and h is height in meters above a reference point. This formula assumes a uniform gravitational field, which is accurate for heights small compared to Earth's radius.

What is potential energy measured in?

Potential energy is measured in joules (J) in the SI system. One joule equals one kilogram-meter squared per second squared (kg·m²/s²). In some contexts, you may also see energy measured in calories (1 cal = 4.184 J), electron volts (1 eV = 1.6×10⁻¹⁹ J), or foot-pounds in imperial units.

Does the path matter for gravitational potential energy?

No, gravitational potential energy only depends on the vertical height difference, not the path taken. Whether you climb straight up or take a winding path, the potential energy at a given height remains the same. This path-independence makes gravity a conservative force, which is fundamental to energy conservation in mechanics.

What happens to potential energy when an object falls?

When an object falls, its gravitational potential energy converts to kinetic energy. The total mechanical energy remains constant (ignoring air resistance). At the lowest point, all potential energy has transformed into kinetic energy, and the object reaches its maximum velocity. This principle is expressed as: PE_initial + KE_initial = PE_final + KE_final.

Why is potential energy considered "stored" energy?

Potential energy is called stored energy because it represents the capacity to do work based on position or configuration. When you lift an object, the work you do against gravity gets "stored" in the object-Earth system. This stored energy can be released as kinetic energy when the object falls, performing work as it descends.

How does gravity affect potential energy on different planets?

Potential energy varies directly with gravitational acceleration. On the Moon (g = 1.62 m/s²), an object has about 1/6 the potential energy it would have at the same height on Earth. On Jupiter (g = 24.79 m/s²), it would have about 2.5 times more potential energy. This affects everything from how high astronauts can jump to how much energy is needed to launch rockets.

Can potential energy be negative?

Yes, potential energy can be negative depending on your chosen reference point. If you set ground level as zero, anything below ground (like a basement or mine) has negative potential energy. The choice of reference point is arbitrary - only changes in potential energy have physical significance. This is why we focus on potential energy differences when solving problems.

What is the relationship between potential and kinetic energy?

Potential and kinetic energy are interconvertible forms of mechanical energy. In a closed system without friction or air resistance, their sum remains constant (conservation of energy). As an object falls, potential energy decreases while kinetic energy increases by exactly the same amount. This relationship is described by: PE + KE = Total Mechanical Energy (constant).

What is potential energy?
Potential energy is energy stored in an object due to its position, configuration, or state — energy that has the potential to do work. Key concept: potential energy is always defined relative to a reference point. Changing the reference doesn't change the physics; it just changes the numerical value of PE. Main types: Gravitational potential energy (GPE): Energy due to an object's height above a reference level. Formula: PE = mgh. A book on a shelf has more GPE than on the floor. Elastic potential energy: Energy stored in deformed elastic objects (springs, rubber bands, bending beams). Formula: PE = ½kx². Chemical potential energy: Energy stored in chemical bonds. Released in combustion, batteries, metabolism, and explosives. Electric potential energy: Energy of charged particles in an electric field. Responsible for electricity, atomic structure, and chemical bonding. Nuclear potential energy: Enormous energy stored in atomic nuclei. Released in fission (nuclear power plants) and fusion (the Sun). Relationship to kinetic energy: As an object falls, GPE converts to KE. At any point: Total Energy = PE + KE = constant (in ideal systems). Conservation of energy: energy is never created or destroyed, only converted between forms. Real-world example: A 70 kg person at the top of a 10 m diving platform: GPE = 70 × 9.81 × 10 = 6,867 J. At water entry (h = 0): all converted to KE → velocity = √(2 × 6,867 / 70) ≈ 14 m/s = 50 km/h.
How do you calculate gravitational potential energy?
Gravitational potential energy (GPE) near Earth's surface is calculated with a straightforward formula. The formula: PE = m × g × h. Where: PE = potential energy (joules, J). m = mass (kilograms, kg). g = gravitational acceleration = 9.81 m/s² (9.8 m/s² for quick estimates). h = height above reference point (meters, m). The reference point: h is always measured from some reference level. Usually the lowest point in the problem (ground, floor, table). The reference point choice doesn't affect energy CHANGES — only absolute values. Example calculations: Example 1 — Ball on a shelf: Mass = 0.5 kg, height = 2 m. PE = 0.5 × 9.81 × 2 = 9.81 J. If it falls: all 9.81 J converts to kinetic energy at ground level. Example 2 — Hydroelectric dam: Water height = 100 m, volume = 1 m³ (mass = 1,000 kg per m³). PE per cubic meter = 1,000 × 9.81 × 100 = 981,000 J ≈ 981 kJ per m³. Example 3 — Person on stairs: Mass = 70 kg, stair height = 3 m (one flight). PE = 70 × 9.81 × 3 = 2,060 J = 2.06 kJ. This equals the energy required to climb those stairs (ignoring efficiency losses). Variation with g: On the Moon (g = 1.62 m/s²): PE = m × 1.62 × h. On Mars (g = 3.72 m/s²): PE = m × 3.72 × h. For objects very far from Earth (orbital mechanics), use the universal gravitational formula: PE = −GMm/r.
What is the difference between potential energy and kinetic energy?
Potential energy (PE) and kinetic energy (KE) are the two fundamental forms of mechanical energy. They are constantly converting between each other in moving systems. Potential energy: Energy of position or configuration. Stored energy that has not yet been released. Depends on: mass, height (for GPE), deformation (for elastic PE), charge/position (for electric PE). Formula: PE = mgh (gravitational, near Earth). Kinetic energy: Energy of motion. Energy an object has because it is moving. Depends on: mass and velocity². Formula: KE = ½mv². Key insight: KE grows with v² (velocity squared). Doubling speed quadruples KE. Conservation of mechanical energy: In an ideal system with no friction or air resistance: Total Energy = PE + KE = constant. As PE decreases, KE increases by the same amount — and vice versa. Example — falling object: At top (h = 10 m, v = 0): PE = mgh = 70 × 9.81 × 10 = 6,867 J. KE = 0 J. Total = 6,867 J. At mid-point (h = 5 m): PE = 3,434 J. KE = 3,434 J. Total = 6,867 J (conserved). At bottom (h = 0 m): PE = 0 J. KE = 6,867 J. v = √(2 × 6,867 / 70) ≈ 14 m/s. Real systems: Friction converts some mechanical energy to heat. Air resistance converts some KE to thermal energy and sound. That's why real falling objects reach terminal velocity instead of accelerating forever. Energy-momentum distinction: Energy is a scalar (no direction). Momentum is a vector (has direction). Both are conserved separately. They are related: KE = p²/(2m), where p = momentum.
How is potential energy used in real-world applications?
Potential energy storage and conversion is at the heart of many important engineering applications. 1. Hydroelectric power: Water at high elevation has gravitational PE. When released through a turbine: GPE → KE → electrical energy. Efficiency: ~90% (one of the most efficient energy conversions). Global hydropower = ~16% of world electricity generation. Example: Hoover Dam, 186 m head → ~2,080 MW capacity. 2. Pumped hydro storage (grid battery): Excess electricity pumps water uphill (electrical → GPE). Peak demand: water flows back down (GPE → electrical). The world's largest "battery" technology — stores ~90% of global grid-scale energy storage. Round-trip efficiency: ~70–80%. 3. Flywheels: Kinetic energy storage (not PE directly, but related). High-speed spinning disk stores rotational KE. Used in data centers, transit buses, and short-term grid stabilization. 4. Springs and elastic energy: Springs in cars (suspension), clocks (mainsprings), archery (bow limbs). Elastic PE = ½kx². Spring stores energy when compressed; releases it when relaxed. 5. Chemical potential energy: Batteries: chemical PE → electrical energy. Fuel combustion: chemical PE → heat → mechanical → electrical. Food: chemical PE → biological energy (ATP). 6. Roller coasters and pendulums: Classic PE↔KE conversions in entertainment physics. Roller coaster chain lift → GPE at peak → KE in valleys. Pendulum: GPE at apex, maximum KE at bottom; oscillates continuously (in ideal conditions). 7. Gravitational energy in space: Rockets must overcome Earth's gravitational PE to reach orbit. Escape velocity (11.2 km/s) is the speed needed for KE = |GPE|.

Key Takeaways

  • Potential energy is stored energy based on an object's position in a gravitational field
  • The formula is PE = mgh (mass × gravity × height)
  • On Earth, gravity (g) equals 9.8 m/s² or approximately 10 m/s² for quick calculations
  • Potential energy is measured in joules (J) in the SI system
  • PE depends only on height difference, not the path taken - gravity is a conservative force

What Is Gravitational Potential Energy?

Type Formula Variables Example
Gravitational (near Earth)PE = mghm=mass, g=9.81 m/s², h=heightBall at height h
Gravitational (universal)PE = −GMm/rG=6.674×10⁻¹¹, M/m=masses, r=distancePlanetary orbit
Elastic (spring)PE = ½kx²k=spring constant, x=displacementCompressed spring
Electric (point charges)PE = kq₁q₂/rk=8.99×10⁹, q=charges, r=distanceCapacitor, ionic bonds
MagneticPE = −μ·Bμ=magnetic moment, B=fieldMRI, magnetic storage
ChemicalStored in bondsVaries by substanceBattery, food, fuel
Object Mass Height Gravitational PE
Tennis ball0.058 kg1 m0.57 J
Person (70 kg)70 kg1 m686 J
Person (70 kg)70 kg10 m (3 floors)6,860 J
Car (1,500 kg)1,500 kg10 m147,150 J (147 kJ)
1 liter water1 kg100 m (dam)981 J ≈ 1 kJ
1,000 ton boulder1,000,000 kg100 m981 MJ
Unit Equivalent Common Use
1 Joule (J)1 kg·m²/s²SI base unit
1 kilojoule (kJ)1,000 JFood energy, thermodynamics
1 calorie (cal)4.184 JHistorical; chemistry
1 kilocalorie (kcal)4,184 JFood labeling (dietary Calorie)
1 kWh (kilowatt-hour)3,600,000 J = 3.6 MJElectricity billing
1 BTU1,055 JHVAC, gas heating
1 eV (electron-volt)1.602 × 10⁻¹⁹ JAtomic/nuclear physics

Gravitational potential energy is the energy an object possesses due to its position in a gravitational field. When you lift an object against gravity, you do work on it, and that work gets stored as potential energy. This stored energy can be converted back into kinetic energy (motion) when the object falls.

Think of potential energy as "stored work" - the higher you lift an object, the more energy you store in it. A ball held at 10 meters has twice the potential energy of the same ball held at 5 meters. This relationship is what makes potential energy so useful in physics: it's directly proportional to height.

The concept was first formalized in the 19th century by scientists like William Rankine and William Thomson (Lord Kelvin), though the underlying principles were understood by earlier physicists studying mechanics and motion.

PE = m × g × h
PE = Potential Energy (Joules)
m = Mass (kilograms)
g = Gravitational acceleration (9.8 m/s² on Earth)
h = Height (meters)

How to Calculate Potential Energy (Step-by-Step)

Step-by-Step Calculation Guide

1

Identify the Mass

Determine the mass of your object in kilograms (kg). If given in grams, divide by 1000 to convert. For example, 500 grams = 0.5 kg.

2

Measure the Height

Measure the vertical height above your reference point in meters. The reference point (where PE = 0) is arbitrary but typically ground level.

3

Use Standard Gravity

For Earth calculations, use g = 9.8 m/s². For quick estimates, g = 10 m/s² gives results within 2% accuracy.

4

Multiply the Values

Calculate PE = m × g × h. For example: 5 kg × 9.8 m/s² × 10 m = 490 Joules.

5

Express Your Answer

State your answer in joules (J). For very large values, use kilojoules (1 kJ = 1000 J) or megajoules (1 MJ = 1,000,000 J).

Worked Examples

Example 1: Book on a Shelf

A 2 kg textbook sits on a shelf 1.5 meters above the floor. Calculate its potential energy.

Mass (m) 2 kg
Height (h) 1.5 m
PE = mgh 29.4 J

PE = 2 kg × 9.8 m/s² × 1.5 m = 29.4 Joules

Example 2: Weightlifter

A weightlifter raises a 100 kg barbell 2 meters above the ground. What is the potential energy stored?

Mass (m) 100 kg
Height (h) 2 m
PE = mgh 1,960 J

PE = 100 kg × 9.8 m/s² × 2 m = 1,960 Joules (nearly 2 kJ)

Example 3: Hydroelectric Dam

Water (1000 kg) falls from a reservoir 50 meters high. Calculate the potential energy available.

Mass (m) 1000 kg
Height (h) 50 m
PE = mgh 490 kJ

PE = 1000 kg × 9.8 m/s² × 50 m = 490,000 J = 490 kJ. This is how hydroelectric plants generate electricity!

Energy Conservation and Conversion

One of the most important principles in physics is the conservation of energy. Gravitational potential energy doesn't disappear - it transforms into other forms of energy. Understanding these conversions is key to solving many physics problems.

Potential to Kinetic Energy

When an object falls freely (ignoring air resistance), its potential energy converts entirely to kinetic energy. At any point during the fall:

Total Mechanical Energy = PE + KE = constant

This means as height decreases, speed increases proportionally. At the ground (h = 0), all potential energy has become kinetic energy, and the object reaches maximum velocity.

Pro Tip: Finding Final Velocity

To find an object's velocity after falling from height h, use energy conservation: mgh = ½mv². Solving for v gives: v = √(2gh). This formula doesn't depend on mass - all objects fall at the same rate!

Real-World Energy Transformations

  • Roller coasters: PE at the top converts to KE going down, then back to PE climbing the next hill
  • Pendulums: Continuous exchange between PE (at highest points) and KE (at lowest point)
  • Bouncing balls: PE → KE → elastic PE (compressed) → KE → PE (with some energy lost to heat and sound)
  • Hydroelectric dams: Water's PE → KE of falling water → rotational energy of turbines → electrical energy

Common Mistakes to Avoid

Watch Out for These Errors

  • Wrong units: Always convert to SI units (kg, m, s) before calculating. A mass of 500g should be 0.5 kg.
  • Forgetting the reference point: PE = 0 at your chosen reference level. Heights below this point give negative PE values.
  • Confusing weight and mass: Weight = mg (force in Newtons), while mass is measured in kilograms.
  • Using the wrong g value: Earth's g = 9.8 m/s². The Moon's g = 1.62 m/s². Don't mix them up!
  • Path confusion: PE depends only on vertical height, not the path taken. A winding road to a mountaintop gives the same PE as climbing straight up.

Gravity on Different Planets

Gravitational acceleration varies significantly across celestial bodies. This directly affects potential energy calculations:

Location Gravity (m/s²) Relative to Earth PE of 10kg at 10m
Earth 9.8 100% 980 J
Moon 1.62 16.5% 162 J
Mars 3.71 37.9% 371 J
Jupiter 24.79 253% 2,479 J
Venus 8.87 90.5% 887 J

Real-World Applications

Understanding potential energy isn't just academic - it has crucial applications across engineering, sports, and everyday life:

Engineering Applications

  • Hydroelectric power: Dams store water at height, converting PE to electrical energy. The Hoover Dam generates over 2,000 MW.
  • Pumped storage: Excess electricity pumps water uphill; during peak demand, the water flows down to generate power.
  • Structural engineering: Engineers calculate PE to understand forces in bridges, buildings, and towers.
  • Crane operations: Lifting heavy loads requires understanding the PE gained and safely controlling descent.

Sports and Recreation

  • Skiing and snowboarding: Starting from height provides PE that converts to speed going downhill.
  • Bungee jumping: PE at jump height converts to KE, then elastic PE in the cord, creating the bounce effect.
  • High diving: Divers convert PE to KE, reaching speeds over 50 km/h from 10-meter platforms.
  • Pole vaulting: Athletes convert running KE to elastic PE in the pole, then to gravitational PE as they rise.

Pro Tip: Energy Efficiency

When designing systems that use potential energy (like roller coasters or water slides), account for energy losses to friction and air resistance. Real systems typically achieve 70-90% efficiency in energy conversion.

Types of Potential Energy

While this calculator focuses on gravitational PE, there are several other important types:

  • Elastic Potential Energy: Stored in compressed or stretched materials (springs, rubber bands). Formula: PE = ½kx²
  • Chemical Potential Energy: Stored in chemical bonds (batteries, food, fuel)
  • Electrical Potential Energy: Stored in electric fields between charges
  • Nuclear Potential Energy: Stored in atomic nuclei (released in nuclear reactions)
Does this include friction or air resistance?
Ideal physics formulas assume no friction or drag unless explicitly stated. In real systems, these losses are significant — a projectile's true range is typically 20-40% less than the ideal calculation due to drag. Add a drag term or use a correction factor for real-world engineering applications.