Sourdough Hydration Calculator

Calculate baker's percentage and hydration for sourdough bread. Perfect your artisan loaves with precise measurements.

g
g
g
g

Your Results

Calculated
Hydration
0%
Baker's percentage
Salt Percentage
0%
Of total flour
Total Dough Weight
0g
Before baking

What Your Results Mean

Hydration Level
-
Salt Level
-

Frequently Asked Questions

What is the best hydration for beginner sourdough bakers?

Beginners should start with 65-70% hydration. This level produces manageable dough that is easy to shape while still creating a nice open crumb. As you develop skills in handling wet dough and proper shaping techniques, gradually increase hydration by 2-3% increments. Most bakers find their sweet spot between 72-78% for everyday loaves.

Does my sourdough starter's hydration matter?

Yes, your starter's hydration affects the final dough calculation. Most starters are maintained at 100% hydration (equal parts flour and water by weight). If your starter has different hydration, you need to adjust how much flour and water it contributes. Our calculator assumes 100% hydration starter, which is the most common for home bakers.

Why is my high-hydration dough so hard to handle?

High-hydration doughs (above 75%) require different techniques. Keep your hands wet or oiled, use a bench scraper, and avoid over-handling. Proper gluten development through stretch and folds makes the dough more manageable. Also, cold retarding in the refrigerator firms up the dough for easier shaping. Practice and patience are key - it takes time to develop the feel for wet doughs.

How does whole wheat flour affect hydration?

Whole wheat flour absorbs significantly more water than white flour due to the bran and germ content. When using whole wheat, increase hydration by 5-10% compared to an all-white flour recipe. For example, a 75% hydration white flour recipe might need 80-85% hydration when made with 50% whole wheat. Also consider a longer autolyse to fully hydrate the whole grain.

What is the ideal salt percentage for sourdough?

The ideal salt percentage is 1.8% to 2.2% of total flour weight, with 2.0% being the most common. Salt strengthens gluten, controls fermentation, enhances flavor, and promotes crust browning. Below 1.5%, dough may be slack and bland. Above 2.5%, fermentation slows significantly and the bread may taste too salty.

Can I add other liquids besides water to my hydration calculation?

Yes, other liquids like milk, buttermilk, beer, or juice count toward total hydration. However, these liquids contain fats, sugars, or proteins that affect dough behavior differently than pure water. Milk fats can inhibit gluten development, while sugars accelerate browning. When substituting liquids, start with less than a 1:1 replacement and adjust based on dough feel.

How do I convert a regular bread recipe to baker's percentages?

To convert any recipe to baker's percentages: (1) Total all flour weights and set this as 100%. (2) Divide each ingredient's weight by total flour weight, then multiply by 100. For example, if a recipe has 500g flour and 325g water: 325/500 x 100 = 65% hydration. This works for any ingredient and makes recipes infinitely scalable.

Does altitude affect sourdough hydration?

Yes, high altitude (above 3,000 feet) affects baking. Lower air pressure causes faster fermentation and greater moisture evaporation. High-altitude bakers often need to increase hydration by 2-4%, reduce fermentation time, and possibly reduce starter quantity. Flour also tends to be drier at altitude, requiring additional adjustment. Keep notes on what works for your specific elevation.

What is baker's percentage and how is hydration calculated?
Baker's percentage (BP) is a notation system used by professional bakers where each ingredient's quantity is expressed as a percentage of the total flour weight. This makes recipes scalable and directly comparable regardless of batch size. How it works: flour is always 100%. Every other ingredient is expressed as a percentage of the total flour weight. Formula: ingredient % = (ingredient weight / total flour weight) × 100. Hydration specifically: hydration % = (water weight / flour weight) × 100. Example: a recipe with 500g flour and 375g water: hydration = 375 / 500 × 100 = 75%. Why baker's percentage matters: makes scaling easy: 75% hydration always means 3/4 the water weight relative to flour, whether you make 1 loaf or 100. Allows direct comparison between recipes: a recipe with 500g flour + 375g water vs. 1000g flour + 750g water are both 75% hydration — identical dough consistency. Makes it easy to see recipe ratios: salt at 2% of flour is a standard flavor level (too much or too little is obvious). Sourdough starter percentage: starter is also expressed as a percentage of flour. Example: 20% starter at 100% hydration = 100g starter per 500g flour. The starter itself contains flour and water — typically in a 1:1 ratio (100% hydration starter). Practical hydration ranges: 65% — beginner-friendly; easier to handle; denser crumb. 70–75% — classic open-crumb sourdough range; workable with practice. 80%+ — very sticky; requires bench knife and high-skill shaping; produces very open crumb. Whole grain adjustment: whole wheat and rye flours absorb more water than white flour. When substituting whole grain for white, increase water by ~5% per 10% whole-grain substitution.
What hydration level should I use for sourdough bread?
The right hydration level depends on your experience, flour type, desired bread style, and ambient conditions. For beginners (first 10–20 bakes): start at 65–70% hydration. The dough is workable, less sticky, and easier to shape. You'll learn fermentation cues without fighting a wet, unmanageable dough. At 65–70%, you can still get a good oven spring and decent crumb. For experienced home bakers targeting open crumb: 72–78% hydration is the sweet spot for bread flour-based sourdough. Produces airy, open crumb and chewy texture when properly fermented. Requires confident shaping — lamination folds, coil folds, or stretch-and-fold during bulk ferment. For high-hydration specialist loaves (ciabatta, focaccia): 80–100%+ hydration. Very wet, almost pourable dough (focaccia at 90–100% is normal). Use a pan rather than freeform baking. Flour absorption factors: strong bread flour (high protein, 12.5–14%) absorbs more water than all-purpose (10–12%). Freshly milled whole-grain flour absorbs significantly more water. Higher-protein flours can handle higher hydration. Adjust for environment: dry climates or winter heating dries out dough faster — may benefit from higher hydration. Humid climates — dough absorbs moisture from the air; may need slightly lower hydration. Hydration and oven spring: very high hydration (>80%) can produce a flatter loaf if not properly shaped or if the dough is over-proofed. The steam from high-water-content dough helps form the crust. A good test: after mixing to 70% hydration successfully 3–4 times, bump to 75%. Then 78%. Incremental increases let you build skill without drastic changes. Master one hydration level before moving higher.
How do I calculate how much starter to add to my dough?
Starter percentage is the amount of mature sourdough starter (at peak activity) added relative to total flour weight. Calculating starter quantity: starter % = (starter weight / flour weight) × 100. To find how much starter for a given recipe: starter weight = (starter % / 100) × flour weight. Example: recipe calls for 500g flour with 20% starter: starter weight = 0.20 × 500 = 100g starter. Typical starter ranges and effects: 10–15% starter: slower fermentation (6–12+ hours at 75°F); more complex sour flavor; better for overnight or cold bulk ferment. 20–25% starter: standard range; moderate fermentation time (4–8 hours at 75°F); balanced flavor. 25–30% starter: faster fermentation; less sour flavor (less time for acid development); better for warmer kitchens. 30%+ starter: very fast fermentation; mild flavor; useful when ambient temperature is low. How starter hydration affects dough hydration: most home bakers keep a 100% hydration starter (equal parts flour and water by weight). The starter contributes both flour and water to the total dough. If you add 100g of 100% hydration starter: it contributes 50g flour + 50g water to the recipe. To calculate true hydration, you must account for the starter's flour and water contributions. Adjusted formula: true water = recipe water + (starter weight × starter hydration / 100 × 0.5). True flour = recipe flour + (starter weight × 0.5). Most home bakers approximate by treating the starter as adding slight additional water, which is accurate enough for adjustments. Peak starter timing: starter must be at or near peak (maximum rise) when added to dough. Using under-active starter produces slow, uneven fermentation. Using over-peaked starter (past peak and collapsed) produces overly sour flavor and weak fermentation structure.
Why does sourdough bread need bulk fermentation and proofing?
Sourdough bread uses two distinct fermentation stages — bulk fermentation and proofing (second rise) — and both are essential for different reasons. Bulk fermentation (the first rise): what happens: the starter (wild yeast + bacteria) begins consuming sugars in the dough, producing CO2 and organic acids. CO2 gets trapped in the gluten network, creating bubbles and expanding the dough. Lactic and acetic acid develop flavor and affect the final bread's sourness. Gluten also continues developing during this phase through enzymatic activity. What you're looking for: 50–75% volume increase (not quite double for high-hydration dough). A dough that feels airy and jiggly when shaken. Bubbles visible throughout the dough (especially on sides). Time varies: 3–12 hours depending on temperature and starter amount. The bulk ferment also sets up structure: stretching and folding during bulk ferment organizes and tightens the gluten network, creating the structure needed to hold shape and trap gas during baking. Why you can't skip bulk ferment: without adequate bulk fermentation, the dough lacks the developed structure, flavor, and gas to produce an open crumb and good oven spring. Proofing (final proof, second rise): what happens: after shaping, the dough proofs in a banneton or proofing basket. The shaped dough continues fermenting, creating final gas structure and surface tension before baking. What you're looking for: dough passes the "poke test" — a floured finger poke springs back slowly (50–75% spring-back) rather than immediately (under-proofed) or not at all (over-proofed). Cold proof vs. room temperature proof: cold proofing (in refrigerator 8–16 hours): slows fermentation; develops more complex sour flavor; makes scoring easier. Room temperature proofing: faster; less sour. Connecting both stages: under-fermented dough = dense, gummy interior, poor oven spring. Over-fermented dough = flat loaf, too sour, weak structure, can't hold its shape. The combination of proper bulk ferment + proper final proof is what determines whether the bake succeeds or fails.

Key Takeaways

  • Hydration is the ratio of water to flour, expressed as a percentage
  • Most sourdough breads range from 65% to 85% hydration
  • Higher hydration creates more open crumb but is harder to handle
  • Starter (at 100% hydration) contributes equal parts flour and water
  • Salt should be 1.8% to 2.2% of total flour weight

What Is Sourdough Hydration? A Complete Explanation

Hydration Level Water:Flour Ratio Dough Consistency Typical Use
60–65%0.60–0.65Stiff; firm; easy to shapeStiff rye breads; bagels; denser loaves
65–70%0.65–0.70Slightly firm; workableBeginner sourdough; sandwich loaves
70–75%0.70–0.75Soft; tacky; needs techniqueStandard open-crumb sourdough; country loaves
75–80%0.75–0.80Sticky; requires good shaping skillsOpen-crumb loaves; ciabatta-style
80–85%0.80–0.85Very sticky; wetHigh hydration sourdough; focaccia
85–100%+0.85–1.00+Extremely wet; pourable (100%)Ciabatta; no-knead loaves; some focaccia
Note: Higher hydration = more open crumb (larger holes) and a chewier texture, but more difficult to handle. Whole grain flours absorb more water than white flour — adjust hydration accordingly.
Recipe Component Basic Sourdough Country Loaf Whole Wheat Rye Bread
Bread flour100%80%50%30%
Whole wheat flour0%20%50%0%
Rye flour0%0%0%70%
Water72%75%80%75%
Salt2%2%2%2%
Starter (at peak)20%20%20%25%
Note: Baker's percentage = ingredient weight ÷ total flour weight × 100. All percentages relative to total flour weight (bread flour + whole wheat + rye = 100%).
Bulk Ferment Temp Approximate Bulk Ferment Time Notes
65°F (18°C)10–14 hoursVery slow; good for overnight bulk in cool kitchen
70°F (21°C)6–10 hoursStandard cool room temperature
75°F (24°C)4–6 hoursIdeal warm room temperature
78°F (26°C)3–5 hoursProofer or warm kitchen; often used by professionals
82°F (28°C)2–4 hoursHot kitchen; monitor closely for over-fermentation
85°F (29°C)1.5–3 hoursVery fast; risk of over-proofing if not monitored
Note: Starter activity, flour type, and dough volume all affect fermentation speed. These are guidelines — use dough feel (50–75% volume increase, bubbles throughout) as primary indicator, not time alone.

Sourdough hydration refers to the ratio of water to flour in your bread dough, expressed as a percentage. This concept, known as baker's percentage or baker's math, is the universal language professional bakers use to communicate recipes and scale batches. Understanding hydration is essential for controlling your bread's texture, crumb structure, crust development, and overall quality.

In baker's percentage, flour is always considered 100%, and all other ingredients are calculated relative to the flour weight. If you have 500 grams of flour and 350 grams of water, your hydration is 70% (350 divided by 500, multiplied by 100). This system makes it easy to scale recipes up or down while maintaining consistent results.

The beauty of understanding hydration is that it empowers you to adjust recipes to your preferences. Want a crustier, more open-crumb bread? Increase hydration. Prefer a tighter crumb that's easier to slice for sandwiches? Lower the hydration. Once you understand these principles, you can create your own signature loaves.

Why Baker's Percentage Matters

Unlike volumetric measurements (cups, tablespoons), baker's percentages provide precise, scalable formulas. Professional bakeries worldwide use this system because it ensures consistency whether making one loaf or one hundred. When you see a recipe written in baker's percentages, you can immediately understand the bread's characteristics before even mixing the dough.

Hydration % = (Total Water / Total Flour) x 100
Total Water = Water + (Starter x 0.5)
Total Flour = Flour + (Starter x 0.5)

Understanding Different Hydration Levels

Different hydration levels produce dramatically different bread characteristics. Here is a comprehensive guide to help you choose the right hydration for your baking goals:

Hydration Level Percentage Characteristics Best For
Low Hydration 55-65% Stiff, easy to shape, tight crumb Bagels, pretzels, sandwich bread
Medium Hydration 65-72% Balanced handling, moderate crumb French bread, everyday loaves
Standard Sourdough 72-78% Classic open crumb, good handling Artisan country loaves
High Hydration 78-85% Very open crumb, harder to shape Ciabatta, focaccia
Very High Hydration 85%+ Extremely open, pudding-like dough Advanced bakers, specific styles

Pro Tip: Start at 70% Hydration

If you are new to sourdough baking, begin with 70% hydration. This level is forgiving enough to learn proper shaping techniques while still producing a beautiful open crumb. As your skills develop, gradually increase hydration by 2-3% at a time to build confidence with wetter doughs.

How to Calculate Sourdough Hydration Step-by-Step

Calculating true hydration in sourdough requires accounting for the flour and water contained within your starter. Most sourdough starters are maintained at 100% hydration, meaning they contain equal parts flour and water by weight. Here is how to calculate your total dough hydration:

Step-by-Step Calculation

1

Calculate Starter Contributions

For 100% hydration starter, half is flour and half is water. Example: 100g starter = 50g flour + 50g water.

2

Add Up Total Flour

Total flour = Recipe flour + Starter flour. Example: 500g flour + 50g (from starter) = 550g total flour.

3

Add Up Total Water

Total water = Recipe water + Starter water. Example: 350g water + 50g (from starter) = 400g total water.

4

Calculate Hydration Percentage

Hydration = (Total Water / Total Flour) x 100. Example: (400g / 550g) x 100 = 72.7% hydration

5

Calculate Salt Percentage

Salt % = (Salt weight / Total Flour) x 100. Example: (11g / 550g) x 100 = 2.0% salt

How Flour Type Affects Hydration

Different flours absorb water at different rates, which significantly impacts how your dough feels and performs. Understanding flour absorption is crucial for adjusting hydration to achieve your desired results.

Whole Grain Flours

Whole wheat, rye, spelt, and other whole grain flours contain bran and germ, which absorb significantly more water than white flour. When using whole grains, you typically need to increase hydration by 5-10% to achieve a similar dough consistency. A 75% hydration dough made with 100% white flour might feel the same as an 82% hydration dough made with 50% whole wheat.

Bread Flour vs. All-Purpose

Bread flour has higher protein content (12-14%) compared to all-purpose flour (10-12%). Higher protein flours absorb more water and develop stronger gluten networks, which is beneficial for high-hydration sourdoughs. If switching from bread flour to all-purpose, consider reducing hydration by 2-3%.

Fresh vs. Aged Flour

Freshly milled flour often requires slightly less water than commercially aged flour. If you mill your own grains, start with lower hydration and adjust as needed. Aged flour has had time for oxidation to strengthen its gluten potential.

Understanding Salt in Sourdough

Salt plays multiple critical roles in sourdough bread beyond simply adding flavor. It strengthens gluten structure, controls fermentation speed, enhances crust color through Maillard reaction, and extends shelf life. Getting the right salt percentage is essential for balanced, well-developed bread.

The standard salt percentage for sourdough is 1.8% to 2.2% of total flour weight. Lower than 1.5% may result in slack dough with poor structure and bland flavor. Higher than 2.5% can inhibit fermentation and create an overly salty taste. Most bakers find 2.0% to be the sweet spot for flavor and functionality.

Fine Salt vs. Coarse Salt

When measuring salt, keep in mind that volume measurements can be misleading. Fine table salt is much denser than coarse sea salt or kosher salt. By weight, 10 grams of any salt is the same, but by volume, you would need roughly 1.5-2 times more coarse salt to match the same weight of fine salt. This is why weighing ingredients in grams is the most accurate approach.

Understanding Starter Hydration

Your sourdough starter's hydration level affects how much flour and water it contributes to your final dough. Our calculator assumes 100% hydration starter (equal parts flour and water), which is the most common maintenance ratio. However, some bakers prefer stiffer (50-80% hydration) or more liquid (125%+) starters.

If your starter is not 100% hydration, you will need to adjust the calculation. For a stiff starter at 60% hydration, every 100 grams contains approximately 62.5 grams of flour and 37.5 grams of water. For a liquid starter at 125% hydration, every 100 grams contains approximately 44 grams of flour and 56 grams of water.

Troubleshooting Common Hydration Issues

Dough Too Sticky

If your dough is unmanageably sticky, the hydration might be too high for your flour or skill level. Try reducing water by 10-20 grams, or use stronger bread flour. Proper technique also helps - keep your hands wet or oiled, use a bench scraper, and develop the gluten through stretch and folds before expecting the dough to become less tacky.

Dough Too Stiff

A stiff dough that tears rather than stretches needs more hydration. Add water 10-15 grams at a time during mixing. Whole grain flours especially may need more water than you expect. A properly hydrated dough should feel tacky but not sticky, and stretch without tearing.

Dense, Tight Crumb

If your bread has a tight, dense crumb despite proper fermentation, try increasing hydration by 3-5%. Higher hydration allows more gas expansion and creates the characteristic open crumb holes. However, also ensure you are not deflating the dough during shaping.

Flat, Spreading Loaf

A loaf that spreads flat during baking often indicates over-fermentation or too-high hydration for the flour's strength. Try reducing hydration, using stronger flour, or shortening bulk fermentation time. Building more tension during shaping also helps the loaf hold its shape.

Advanced Hydration Techniques

Autolyse

Autolyse is a pre-mixing rest period where flour and water hydrate before adding salt and starter. This technique allows enzymes to begin breaking down starches and proteins, resulting in better dough extensibility and easier handling even at higher hydrations. A typical autolyse lasts 30-60 minutes, though some bakers extend it to several hours.

Bassinage (Reserved Water)

Bassinage is the technique of holding back some water initially, then incorporating it after the gluten has partially developed. This allows you to achieve higher hydration levels while maintaining workable dough. Mix your dough at 65-70% hydration first, develop the gluten, then gradually add the remaining water in small amounts.

Temperature Consideration

Water temperature affects dough feel and fermentation rate. Cold water (65-70F/18-21C) slows fermentation and can make high-hydration doughs easier to handle. Warm water (80-85F/27-29C) accelerates fermentation. Many bakers calculate their desired dough temperature and adjust water temperature accordingly.

Why do my results differ from other converters?
Volume-to-weight conversions depend on the specific ingredient and its packing density. A 'cup of flour' can range from 110g (sifted) to 155g (packed) — a 40% difference. For baking precision, weigh ingredients rather than measuring by volume.